SWEET WOOL

This type is for clay.
Because the shape is raised bottom, highly transparent resin is not suitable.
It is possible to use a resin that is strongly colored and loses transparency.

Materials that can be used: Resin clay, lightweight clay, oven clay, resin (In addition, it is not mirror finish.)
Not usable Material: Silicone material
Material: Silicone rubber
Sales source: Co., Ltd. Nisshin Associates

■ Notes on using clay
When filling with clay, put it in a concave shape (if you retract it), stick it to the side with your finger etc., make the clay spread throughout the concave shape, and set the convex shape.
If you roll the clay to the convex side first and set the concave shape, it is easy to make wrinkles on the side of the clay.

■ Cautions when using resin
* In the case of a shape where air bubbles are likely to enter in the corner, paint the resin with a brush etc. on the part where air bubbles are likely to accumulate, then pour the resin into
it. Polish with abrasives or spray with acrylic sprays
* UV resin is not usable with abrasives. Also, depending on the manufacturer, there is a UV resin / two-component mixed resin that is very easy to damage the mold.